All car owners must have said that "automobile endoscope" is a sharp tool for automobile repair and maintenance. It is mainly used to detect and diagnose automobile initiators, which greatly reduces the repair time and cost, and also prevents the damage caused by repeated disassembly and assembly of parts. In the car engine cleaning and maintenance can also greatly show its active role.

汽車內窺鏡其實是工業內窺鏡的一種，基本原理是采用光學手段通過小孔將密封物體內部的狀況傳遞出來，然后對光學圖像進行評估，檢測與診斷。

Automotive endoscope is actually a kind of industrial endoscope. The basic principle is to use optical means to transmit the internal condition of the sealed object through the small hole, and then evaluate, detect and diagnose the optical image.

汽車內窺鏡究竟好用不好用呢？舉個例子，假如汽車的發起機發作故障，傳統的診斷方式是憑經歷，通過聲響判定氣缸涌現的問題和詳細在哪個氣缸，須要“崩潰”能力肯定“詳細病因”。然而假如運用汽車內窺鏡的話，通過頭花塞孔或許噴油嘴，可以直觀地視察外部，理解故障的詳細地位。

Is the car endoscope easy to use or not? For example, if the engine of a car breaks down, the traditional way of diagnosis is based on experience. It needs the ability to "crash" and confirm the "detailed cause" through the sound to determine the emerging problem of the cylinder and the specific cylinder. However, if the use of automotive endoscopy, through the plug hole or nozzle, you can visually inspect the outside, understand the detailed status of the fault.

車輛在日常運行中總會涌現一些問題，如發起機哆嗦、熄火、油耗高 級，碰到這些狀態車主就可以運用內窺鏡檢討汽車外部。

There will always be some problems in the daily operation of vehicles, such as engine shaking, flameout and high fuel consumption. When encountering these conditions, the owner can use the endoscope to review the exterior of the vehicle.
                          

汽車內窺鏡有哪些長處？

What are the advantages of automobile endoscope?

1。操作簡樸、靈巧、小巧便于攜帶，柔軟、渺小、可曲折的拔出管可以抵達須要檢討任何隱藏的部位；

1。 The operation is simple, dexterous, small and easy to carry. The soft, small and flexible pulling out tube can reach any hidden part that needs to be checked;

2。直觀正確且簡樸易行，并可以盡早發明外部部件的傷害，很大地有利于將平安隱患在萌芽階段；

2。 It is intuitive, correct, simple and easy to operate, and can invent the damage of external parts as soon as possible, which is very helpful to eliminate the potential safety hazards in the embryonic stage;

3。儀器自身的小巧、便攜性、可挪動性可以很好的增加任務強度、進步任務效力；

3。 The small size, portability and mobility of the instrument can increase the task intensity and improve the task effectiveness;

4。下降了修理費用，同時防止了對機件屢次拆裝而形成的傷害。

4。 The repair cost is reduced, and the damage caused by repeated disassembly and assembly of machine parts is prevented.

小編為大家總結一下，內窺鏡可以用到什么地方吧。

Small make up for you to sum up, endoscope can use where it.

汽車零部件檢測

Auto parts inspection

借助汽車內窺鏡可以定期檢查汽車零件內部產生裂縫或者色素沉著等，被測孔彎曲，小處直徑4MM，普通檢測是無法直接進行觀察的。

With the help of automobile endoscope, the cracks or pigmentation in the interior of automobile parts can be checked regularly. The measured hole is bent, and the diameter of the small part is 4mm. Ordinary detection can not be observed directly.

排氣管內壁

Inner wall of exhaust pipe

沒有汽車內窺鏡的話是無法看到排氣管內的情況的，通過內窺鏡可以明顯的看出排氣管壁是否存在焊接漏洞。

If there is no automobile endoscope, it is impossible to see the situation in the exhaust pipe. Through the endoscope, we can clearly see whether there are welding holes in the exhaust pipe wall.

活塞及火花塞積碳檢查

Carbon deposit inspection of piston and spark plug

按照傳統的方法檢測積碳情況的話，只能“解體”汽車發動機或者觀察反饋電壓變化，重要的是只能去的維修店檢查。通過汽車內窺鏡可以自主檢查汽車發動機，及時發現汽車故障。

According to the traditional method to detect carbon deposition, we can only "disassemble" the car engine or observe the feedback voltage change. The important thing is that we can only go to the professional repair shop to check. Through the automobile endoscope, the automobile engine can be checked independently, and the automobile fault can be found in time.

汽車鑄造件檢測

Inspection of automobile casting parts

汽車內窺鏡應用到鑄件檢查中，主要用來檢查產品內部雜質和沙眼。

Automotive endoscope is used in casting inspection, mainly to check the internal impurities and trachoma of products.

感謝您的閱讀，希望以上內容能夠幫到您，如您想要了解更多資訊內容請多多關注我們的網站。

Thank you for reading, hope the above content can help you, if you want to know more information, please pay more attention to our website.